Clippers
Moser Motor for Moser Rex 1230 Clipper, Prima
Motor for Moser Rex 1230, Prima clippers. GroomerShop.pl is an authorized warranty and post-warranty service for animal clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€11,98
Wahl Wahl Bravura Clipper Battery PCB Electronics
Are you looking for spare/service parts for the Wahl Bravura clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1020 | SRV-W-1870-7875 | Complete housing for Wahl Bravura clipper 1030 | SRV-W-1870-7020 | Motor for Wahl Bravura clipper 1040 | SRV-W-1870-7885 | PCB electronics with battery for Wahl Bravura clipper 1050 | SRV-W-1870-7825 | Battery for Wahl Bravura clipper 2250mAh/3.6V 1060 | SRV-W-1870-7890 | Charging station for Wahl Bravura clipper 1070 | SRV-W-1881-7120 | Power supply with cable for Wahl Bravura clipper
€107,98
Oster Carbon Brushes for Oster Golden A5 Clippers
Carbon brushes for Oster Golden A5 clippers. Set of 2 pieces.
€6,00
Moser Electronic board for Moser Max (1245) clipper, Wahl KM2
Original electronic board, PCB module for Moser Max 45 (1245) clippers, Wahl KM2.
€33,36
Heiniger Lithium-ion battery for Heiniger Saphir, SaphirStyle, SaphirCord clippers
Lithium-ion battery for Heiniger Saphir clippers.
€71,76
Andis Andis AGC, AGC2, AGC2 Super Speed Clipper Isolator
Isolator for Andis AGC, AGC2, AGC2 Super Speed clippers.
€3,36
Oster Oster Golden A5 Clipper - Single Speed - Blade Included: Oster (1.6mm)
Oster Golden A5 is a very sturdy single-speed clipper manufactured in the USA. Fully professional, recommended for veterinarians, groomers, and breeders alike. It operates smoothly and without vibrations, allowing for continuous use. It features easy-to-clean air filters. A special latch stabilizes the blades, preventing them from wobbling during operation. An advantage is the good availability of parts and a rich selection of snap-on blades ranging from 1/20 mm to 19 mm. The warranty is 12 months. The clipper has a simple and easy-to-use one-button blade replacement system. The set includes: Oster Golden A5 single-speed clipper - with a long 4 m soft and round cable, a tube of oil for blade maintenance, a tube of grease for lubricating gears, a set of replacement carbon brushes for the motor, a cleaning brush, an instruction manual in Polish, and a warranty card. The Oster Golden A5 is compatible with Snap-On blades from brands such as Andis, Oster, Moser, Geib, Aesculap, and Wahl. The clipper is sold by the manufacturer without a blade. There is an option to purchase it with an Oster Cryogen-X #10 blade cutting at 1.6mm or with an Oster Cryogen-X #50 surgical blade cutting at 0.2mm.
€215,98
Aesculap Guide screw for Aesculap Favorita clipper (GT104), Speed (GT114)
Aesculap Blade Guide Mounting Screw - M3 x 6mm. Designed for models: Favorita 2 (GT104), Favorita Speed (GT114). GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers intended for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€1,20
Wahl Wahl Bravura Clipper Motor
Are you looking for spare/service parts for the Wahl Bravura clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 1020 SRV-W-1870-7875 Complete housing for the Wahl Bravura clipper 1030 SRV-W-1870-7020 Motor for the Wahl Bravura clipper 1040 SRV-W-1870-7885 PCB electronics with battery for the Wahl Bravura clipper 1050 SRV-W-1870-7825 Battery for the Wahl Bravura clipper 2250mAh/3.6V 1060 SRV-W-1870-7890 Charging station for the Wahl Bravura clipper 1070 SRV-W-1881-7120 Power supply with cable for the Wahl Bravura clipper
€11,98
Heiniger Heiniger Handy Clipper Switch
Are you looking for spare/service parts for the Heiniger Handy clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 SRV-HG-706-501 | Head housing for Heiniger Handy clipper 2 SRV-HG-706-503 | Yoke guide for Heiniger Handy clipper 3 SRV-HG-706-505 | Crank bushing for Heiniger Handy clipper 4 SRV-HG-706-506 | Crankshaft for Heiniger Handy clippers 5 HG-706-507 | Yoke block for Heiniger Handy clippers 6 HG-701-830 | Gear for Heiniger Handy clipper 7 SRV-HG-706-509 | Blade pressure bushing for Heiniger Handy clipper 8 SRV-HG-706-510 | Spacer screw for Heiniger Handy clipper 9 SRV-HG-706-511 | Pressure arm for Heiniger Handy clipper 10 SRV-HG-706-514 | Yoke bushing for Heiniger Handy clipper 11 SRV-HG-706-517 | Pressure spring for Heiniger Handy clippers 12 HG-706-518 | Yoke arm for Heiniger Handy clippers 13 SRV-HG-706-520 | Screw for Heiniger Handy clippers (M5 x 14) 14 SRV-HG-706-521 | Blade mounting screw for Heiniger Handy clipper 15 SRV-HG-706-523 | Screw for Heiniger clippers (M4 X 10) 16 SRV-HG-706-524 | Circlip size 6 for Heiniger clippers 17 SRV-HG-706-525 | Guide screw (M3 X 6) for Heiniger clipper 18 SRV-HG-701-815 | Complete head for Heiniger Handy clipper 19 SRV-HG-701-824 | Motor housing screw for Heiniger Handy (M3.5 x 6) 20 SRV-HG-701-803 | Front motor holder for Heiniger Handy clipper 21 SRV-HG-701-612 | Motor flange gasket for Heiniger Handy 22 SRV-HG-701-610 | Motor centering flange for Heiniger Handy 23 SRV-HG-701-638 | Pressure ring for Heiniger Handy clipper 608 24 SRV-HG-701-636 | Rotor bearing for Heiniger Handy clipper 25 SRV-HG-701-639 | Retaining ring for Heiniger Handy clippers 26 SRV-HG-701-808 | Ventilation wheel for Heiniger Handy motor 27 SRV-HG-701-809 | Rotor for Heiniger Handy clipper 28 SRV-HG-701-637 | Pressure ring for Heiniger 626 clippers 29 SRV-HG-701-635 | Rotor bearing for Heiniger Handy clipper 30 SRV-HG-701-820 | Mounting screw M3x45 for Heiniger Handy clipper 31 SRV-HG-701-616 | Lock washer M3 for Heiniger Handy 32 SRV-HG-701-818 | Spacer bushing for Heiniger Handy clipper 33 SRV-HG-701-817 | Rotor housing for Heiniger Handy clipper 34 SRV-HG-701-822 | Motor stator for Heiniger Handy clipper 35 SRV-HG-701-800-21A | Motor housing for Heiniger Handy clipper 36 SRV-HG-701-633 | Carbon brushes for Heiniger clipper with cover (2x) 37 SRV-HG-701-634 | Carbon brush cap for Heiniger clipper 38 SRV-HG-701-640 | Mounting screws for Heiniger Handy M3.5 x 8 39 SRV-HG-701-645 | Power cable for Heiniger Handy clipper 40 SRV-HG-701-623 | Cable bend for Heiniger Handy clipper 41 SRV-HG-701-800-23 | Suspension for Heiniger Handy clipper 42 SRV-HG-701-867 | Switch housing for Heiniger Handy clipper 43 SRV-HG-701-621 | Motor screw for Heiniger Handy clipper M3.5 44 SRV-HG-701-631 | Switch for Heiniger Handy clipper 45 SRV-HG-701-669 | Capacitor 0.15uF for Heiniger Handy clipper 46 SRV-HG-701-671 | Cable mounting for Heiniger Handy clipper 47 SRV-HG-701-619 | Motor clamp for Heiniger Handy clipper 48 SRV-HG-701-642 | Mounting screw M3 x 25 for Heiniger Handy clipper 49 SRV-HG-701-627 | Motor cover for Heiniger Handy clipper 50 SRV-HG-701-605 | Lower switch housing for Heiniger Handy clipper 51 SRV-HG-701-641 | Housing screw M3X6 for Heiniger Handy clipper 52 SRV-HG-701-600-30A | Air filter for Heiniger Handy clipper
€10,80
Heiniger Heiniger Handy Clipper Motor Rotor
Are you looking for spare/service parts for the Heiniger Handy clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger machines designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-706-501 | Head housing for Heiniger Handy clipper 2 | SRV-HG-706-503 | Yoke guide for Heiniger Handy clipper 3 | SRV-HG-706-505 | Crank bushing for Heiniger Handy clipper 4 | SRV-HG-706-506 | Crankshaft for Heiniger Handy clippers 5 | HG-706-507 | Yoke block for Heiniger Handy clippers 6 | HG-701-830 | Gear for Heiniger Handy clipper 7 | SRV-HG-706-509 | Blade pressure bushing for Heiniger Handy clipper 8 | SRV-HG-706-510 | Spacer screw for Heiniger Handy clipper 9 | SRV-HG-706-511 | Pressure arm for Heiniger Handy clipper 10 | SRV-HG-706-514 | Yoke bushing for Heiniger Handy clipper 11 | SRV-HG-706-517 | Pressure spring for Heiniger Handy clippers 12 | HG-706-518 | Yoke arm for Heiniger Handy clippers 13 | SRV-HG-706-520 | Screw for Heiniger Handy clippers (M5 x 14) 14 | SRV-HG-706-521 | Blade mounting screw for Heiniger Handy clipper 15 | SRV-HG-706-523 | Screw for Heiniger clippers (M4 X 10) 16 | SRV-HG-706-524 | Circlip size 6 for Heiniger clippers 17 | SRV-HG-706-525 | Guide screw (M3 X 6) for Heiniger clipper 18 | SRV-HG-701-815 | Complete head for Heiniger Handy clipper 19 | SRV-HG-701-824 | Motor housing screw for Heiniger Handy (M3.5 x 6) 20 | SRV-HG-701-803 | Front motor holder for Heiniger Handy clipper 21 | SRV-HG-701-612 | Motor flange gasket for Heiniger Handy 22 | SRV-HG-701-610 | Motor centering flange for Heiniger Handy 23 | SRV-HG-701-638 | Pressure ring for Heiniger Handy clipper 608 24 | SRV-HG-701-636 | Rotor bearing for Heiniger Handy clipper 25 | SRV-HG-701-639 | Retaining ring for Heiniger Handy clippers 26 | SRV-HG-701-808 | Ventilation wheel for Heiniger Handy motor 27 | SRV-HG-701-809 | Rotor for Heiniger Handy clipper 28 | SRV-HG-701-637 | Pressure ring for Heiniger 626 clippers 29 | SRV-HG-701-635 | Rotor bearing for Heiniger Handy clipper 30 | SRV-HG-701-820 | Mounting screw M3x45 for Heiniger Handy clipper 31 | SRV-HG-701-616 | Safety washer M3 for Heiniger Handy 32 | SRV-HG-701-818 | Spacer bushing for Heiniger Handy clipper 33 | SRV-HG-701-817 | Rotor housing for Heiniger Handy clipper 34 | SRV-HG-701-822 | Motor stator for Heiniger Handy clipper 35 | SRV-HG-701-800-21A | Motor housing for Heiniger Handy clipper 36 | SRV-HG-701-633 | Carbon brushes for Heiniger clipper with cover (2x) 37 | SRV-HG-701-634 | Carbon brush cap for Heiniger clipper 38 | SRV-HG-701-640 | Mounting screws for Heiniger Handy M3.5 x 8 39 | SRV-HG-701-645 | Power cable for Heiniger Handy clipper 40 | SRV-HG-701-623 | Cable bend for Heiniger Handy clipper 41 | SRV-HG-701-800-23 | Suspension for Heiniger Handy clipper 42 | SRV-HG-701-867 | Switch housing for Heiniger Handy clipper 43 | SRV-HG-701-621 | Motor screw for Heiniger Handy clipper M3.5 44 | SRV-HG-701-631 | Switch for Heiniger Handy clipper 45 | SRV-HG-701-669 | Capacitor 0.15uF for Heiniger Handy clipper 46 | SRV-HG-701-671 | Cable holder for Heiniger Handy clipper 47 | SRV-HG-701-619 | Motor clamp for Heiniger Handy clipper 48 | SRV-HG-701-642 | Mounting screw M3 x 25 for Heiniger Handy clipper 49 | SRV-HG-701-627 | Motor cover for Heiniger Handy clipper 50 | SRV-HG-701-605 | Lower switch housing for Heiniger Handy clipper 51 | SRV-HG-701-641 | Housing screw M3X6 for Heiniger Handy clipper 52 | SRV-HG-701-600-30A | Air filter for Heiniger Handy clipper
€83,98
Aesculap Aesculap Bonum - lightweight, cordless clipper for horses and cattle, two batteries included
New, wireless horse and cattle clipper from Aesculap model Bonum. Extremely slim, ergonomic, and well-balanced, surprisingly lightweight, with low noise levels and a long battery life (up to 80 minutes)! Quiet yet powerful, it handles thick and dense animal fur with ease. Also available in a set equipped with two lithium-ion batteries, allowing you to continue working without interruption when the battery runs out. Ideal for women, it does not strain the hand, increasing comfort and efficiency during use. The modern battery technology used in this model protects the device from overheating and stops its operation when the battery temperature exceeds 50 °C for cooling. Additionally, the charger indicates the battery status with two LED lights. The integrated power button in the housing prevents accidental shutdown during clipping. Indispensable for outdoor work, for every horse and cattle owner. Specifications: exceptionally lightweight, only 900 g, with battery and cutting blades! only 40 mm in diameter or 12.5 cm in circumference in the gripping area, ensuring optimal handling even for small hands; short and handy with a length of just 295 mm; well-balanced, strong, and durable lithium technology, which eliminates memory effect; best quality cutting blade from the Econom series "Made in Germany." Technical data: - Drive: DC motor 10.8 V - Battery technology: 2000 mAh, lithium-ion - Number of strokes: 2500 strokes/min - Working time: 80 min. - Charging time: 55 min. - Noise level: 65 dB (A) - Weight with battery: 900 g - Dimensions (W/H/L): 29.5 x 7.5 x 7.8 cm Included: - Bonum clipper (color to choose from) - 1x or 2x battery - Charging station - Horse clipping blade 23/31 teeth - User manual - Maintenance oil - Sturdy storage case
€551,76 - €599,76
Aesculap Engine ring for Aesculap clippers - 30x2.65mm
Are you looking for spare/service parts for the Aesculap Favorita CL (GT206) clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Andis clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Product Name 1 AE-GT201 Spare battery for Aesculap Favorita CL (GT206) clippers 2 - Lower housing for Aesculap Favorita CL (GT206) clipper 3 - Upper housing for Aesculap Favorita CL (GT206) clipper 4 - Power button for Aesculap Favorita CL (GT206) clipper 5 SRV-AE-GT200249 Switch contact for Aesculap Favorita CL (GT206) clippers 6 SRV-AE-GT200245 Switch guide for Aesculap Favorita CL (GT206) clippers 7 SRV-AE-GT200809 Foam seal for Aesculap Favorita CL (GT206) clippers 8 - Blade lock for Aesculap Favorita CL (GT206) clippers 9 SRV-AE-GT300880 Rocker for Aesculap Favorita CL (GT206) clipper 10 - Protective washer for Aesculap Favorita CL (GT206) clipper 11 AE-GT104315 Blade bed for Aesculap Favorita CL (GT206) clippers 12 SRV-AE-TA013499 M3x16 housing screw for Aesculap Favorita CL (GT206) clipper 13 - Blade screw for Aesculap Favorita CL (GT206) clipper 14 - Blade pressure spring for Aesculap Favorita CL (GT206) clipper 15 - Motor for Aesculap Favorita CL (GT206) clipper 16 SRV-AE-GT200850 PCB electronics for Aesculap Favorita CL (GT206) clipper 17 SRV-AE-TA003820 Safety ring for rocker of Aesculap Favorita CL (GT206) clipper 23 SRV-AE-TA004663 Electronics plate screw for Aesculap Favorita CL (GT206) clipper 24 SRV-AE-GT300305 Cap for Aesculap Favorita CL (GT206) clipper 25 SRV-AE-TA013521 Motor ring 23x3.6mm for Favorita CL (GT206) clipper 26 SRV-AE-TA013522 Motor ring 30x2.65mm for Aesculap Favorita CL (GT206) clipper
€1,44
Heiniger Heiniger Xplorer PRO - wireless, two-speed clipper for horses and cattle, with a brushless motor - battery-operated
Heiniger Xplorer PRO is the latest model of the cordless clipper for grooming horses and cattle from this manufacturer. The Heiniger Xplorer cordless clipper has been developed using the latest lithium-ion battery technology, featuring an efficient cooling system that allows for up to 2 hours of clipping without the need for recharging. The Xplorer PRO model is equipped with a next-generation brushless motor, which is significantly more durable. Additionally, it features two speed settings, enabling it to handle even very thick/woolly animal coats. This clipper is lighter than its predecessor (the Xplorer model). Thanks to a unique dual gear transmission, power is optimally transferred from the motor to the cutting head. With two rows of blades, high efficiency is achieved without loss of power. The body has been reinforced with fiberglass. A practical LED display on the charger indicates the current battery charge level. Included in the set: cordless Heiniger Xplorer PRO clipper, a set of blades with lengths of 2 - 4 mm, two lithium-ion batteries, a blade cleaning brush, a charging station, oil, a blade replacement key, and a storage case. Technical specifications: battery voltage: 10.8V Li-Ion, speed: speed I 2450, speed II 2900 RPM, clipper length: 30 cm, weight with battery: 975 g, noise emission (LpAm): 65dB (A), very quiet, battery charging time: 90 minutes, operating time: max 120 min.
€683,98
Andis Plug socket for the power cable of Andis AGRV and SMC - Excel clippers
Plug compatible with Polish standards. Compatible with the power cord for Andis AGRV clippers (product code A-63345) and SMC-2 Excel (A-63235).
€9,60
Moser Moser MAX 50 - quiet, professional clipper with blade and attachments
Moser Max 50 (successor to Moser Max 1245) is an extremely quiet and lightweight motor clipper designed for continuous use. It features a silenced and cushioned single-speed drive (to reduce vibrations) to ensure maximum comfort for you and your pet during grooming. The Max 50 is an exceptionally ergonomic model, perfectly balanced with a non-slip coating, making grooming a pure pleasure and ensuring the clipper sits securely in your hand. The round, 3-meter long cord facilitates maneuverability and increases freedom of movement while grooming. The clipper has a very long lifespan thanks to its motor, and most importantly - it does not overheat. Compatible with all Snap-On/Clip-On blades from brands such as Moser, Andis, Oster, Wahl, Aesculap, etc. Included: Moser® Max 50 clipper, Moser #30F blade - 1mm, bottle of oil, cleaning brush, user manual + warranty card, set of 2 stainless steel attachment combs (6mm, 13mm). Technical specifications: speed: 3300 RPM, voltage: 100-240V, 50/60Hz, dimensions: 196x54x48mm, weight: approx. 370g (without cable), motor: 12V DC, noise level: max. 63dB (A), vibrations:
€167,98
Oster Stator Wire Mounting Screw for Oster Golden A5
Are you looking for spare/service parts for the Oster Golden A5 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-41664-000 | Blade cover/hinge screw for Oster A5 2 | SRV-O-115286-020 | Front cover for Oster Golden A5 3 | SRV-O-41676-000 | Oiler for Oster Golden A5 4 | SRV-O-42563-000 | Oil wick for Oster Golden A5 6 | O-44946-005-000 | Pivot for Oster Golden A5 7 | O-45515-000 | O-link for Oster Golden A5 8 | SRV-O-41723-000 | Felt grease seal for Oster Golden A5 9 | SRV-O-111012-020 | Brush cover for Oster Golden A5, brown 9 | SRV-O-111012-010 | Brush cover for Oster Golden A5, black 10 | O-42584-025 | Carbon brushes for Oster Golden A5, set of 2 11 | SRV-O-42566-005 | Stop plate for Oster Golden A5 12 | O-105520-000 | Cam (gear) for Oster Golden A5 13 | O-57022-005 | Main housing brown for Oster Golden A5 13 | O-57022-010 | Main housing black for Oster Golden A5 14 | O-58543-000 | Spacer under the cam for Oster Golden A5 15 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 16 | SRV-O-41665-000 | Hinge/cover screw for Oster Golden A5 17 | O-45588-000 | Blade guard for Oster Golden A5 20 | O-42571-000 | Blade pressure bar for Oster 21 | SRV-O-45501 | Blade pressure spring for Oster Golden A5 22 | O-44936-000 | Blade hook for Oster Golden A5 23 | SRV-O-115544-000 | Cover plate for Oster Golden A5 25 | O-42555-000 | Blade screw for Oster A5 26 | SRV-O-57070-000 | Bushing for Oster Golden A5 27 | SRV-O-42568 | Felt washer for Oster Golden A5 29 | SRV-O-58519-000 | Bearing seal for Oster Golden A5 31 | SRV-O-42114-050 | Seal retaining screw for Oster Golden A5 32 | O-84906-005 | Rotor for Oster Golden A5, single speed 32 | O-84906-000 | Rotor for Oster Golden A5, two-speed 33 | SRV-O-84936-000 | Stator for Oster Golden A5 34 | O-44938-000-000 | Blade latch for Oster Golden A5, A6 35 | SRV-O-42557-000 | Seal ring for Oster Golden A5 36 | SRV-O-42559 | Spring cap for Oster Golden A5 37 | SRV-O-42562-000 | Rotor spring for Oster Golden A5 38 | SRV-O-58006-000 | Brush holder for Oster Golden A5 42 | SRV-O-42570-000 | Housing seal ring for Oster Golden A5 43 | SRV-O-53825-091 | Capacitor 0.1uF for Oster Golden A5 44 | O-58357-009 | Switch for Oster Golden A5 single speed 44 | O-SWITCH2 | Switch for Oster Golden A5 two-speed 46 | O-84177-115 | End housing brown for Oster Golden A5 46 | O-84177-125 | End housing black for Oster Golden A5 47 | SRV-O-41756-000 | Spring washer for Oster Golden A5 48 | SRV-O-42113-015 | Terminal clamp screw for Oster Golden A5 49 | SRV-O-41683 | Switch nut for Oster A5 50 | SRV-O-42614-000 | Brush cap for Oster Golden A5 51 | SRV-O-42573-000 | Clip for Oster Golden A5 52 | SRV-O-42551 | Housing clamp for Golden A5 55 | O-165265-000 | Power cord for Oster Golden A5 62 | SRV-O-42564-000 | Stator wire mounting screw for Oster Golden A5 79 | SRV-O-58355-000 | Terminal holder for Oster Golden A5 80 | SRV-O-111013-070 | Air filter for Oster Golden A5, graphite
€0,72
Heiniger Heiniger Clipper Safety Ring
Looking for spare/service parts for the Heiniger Handy clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the "Add to Cart" button. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-706-501 | Head housing for Heiniger Handy clipper 2 | SRV-HG-706-503 | Yoke guide for Heiniger Handy clipper 3 | SRV-HG-706-505 | Crank bushing for Heiniger Handy clipper 4 | SRV-HG-706-506 | Crankshaft for Heiniger Handy clippers 5 | HG-706-507 | Yoke block for Heiniger Handy clippers 6 | HG-701-830 | Gear for Heiniger Handy clipper 7 | SRV-HG-706-509 | Blade pressure bushing for Heiniger Handy clipper 8 | SRV-HG-706-510 | Spacer screw for Heiniger Handy clipper 9 | SRV-HG-706-511 | Pressure arm for Heiniger Handy clipper 10 | SRV-HG-706-514 | Yoke bushing for Heiniger Handy clipper 11 | SRV-HG-706-517 | Pressure spring for Heiniger Handy clippers 12 | HG-706-518 | Yoke arm for Heiniger Handy clippers 13 | SRV-HG-706-520 | Screw for Heiniger Handy clippers (M5 x 14) 14 | SRV-HG-706-521 | Blade mounting screw for Heiniger Handy clipper 15 | SRV-HG-706-523 | Screw for Heiniger clippers (M4 X 10) 16 | SRV-HG-706-524 | Circlip size 6 for Heiniger clippers 17 | SRV-HG-706-525 | Guide screw (M3 X 6) for Heiniger clipper 18 | SRV-HG-701-815 | Complete head for Heiniger Handy clipper 19 | SRV-HG-701-824 | Motor housing screw for Heiniger Handy (M3.5 x 6) 20 | SRV-HG-701-803 | Front motor holder for Heiniger Handy clipper 21 | SRV-HG-701-612 | Motor flange gasket for Heiniger Handy 22 | SRV-HG-701-610 | Motor centering flange for Heiniger Handy 23 | SRV-HG-701-638 | Pressure ring for Heiniger Handy clipper 608 24 | SRV-HG-701-636 | Rotor bearing for Heiniger Handy clipper 25 | SRV-HG-701-639 | Retaining ring for Heiniger Handy clippers 26 | SRV-HG-701-808 | Ventilation wheel for Heiniger Handy motor 27 | SRV-HG-701-809 | Rotor for Heiniger Handy clipper 28 | SRV-HG-701-637 | Pressure ring for Heiniger 626 clippers 29 | SRV-HG-701-635 | Rotor bearing for Heiniger Handy clipper 30 | SRV-HG-701-820 | Mounting screw M3x45 for Heiniger Handy clipper 31 | SRV-HG-701-616 | Safety washer M3 for Heiniger Handy 32 | SRV-HG-701-818 | Spacer bushing for Heiniger Handy clipper 33 | SRV-HG-701-817 | Rotor housing for Heiniger Handy clipper 34 | SRV-HG-701-822 | Motor stator for Heiniger Handy clipper 35 | SRV-HG-701-800-21A | Motor housing for Heiniger Handy clipper 36 | SRV-HG-701-633 | Carbon brushes for Heiniger clipper with cover (2x) 37 | SRV-HG-701-634 | Carbon brush cap for Heiniger clipper 38 | SRV-HG-701-640 | Mounting screws for Heiniger Handy M3.5 x 8 39 | SRV-HG-701-645 | Power cable for Heiniger Handy clipper 40 | SRV-HG-701-623 | Cable bend for Heiniger Handy clipper 41 | SRV-HG-701-800-23 | Hook for Heiniger Handy clipper 42 | SRV-HG-701-867 | Switch housing for Heiniger Handy clipper 43 | SRV-HG-701-621 | Motor screw for Heiniger Handy clipper M3.5 44 | SRV-HG-701-631 | Switch for Heiniger Handy clipper 45 | SRV-HG-701-669 | Capacitor 0.15uF for Heiniger Handy clipper 46 | SRV-HG-701-671 | Cable holder for Heiniger Handy clipper 47 | SRV-HG-701-619 | Motor clamp for Heiniger Handy clipper 48 | SRV-HG-701-642 | Mounting screw M3 x 25 for Heiniger Handy clipper 49 | SRV-HG-701-627 | Motor cover for Heiniger Handy clipper 50 | SRV-HG-701-605 | Lower switch housing for Heiniger Handy clipper 51 | SRV-HG-701-641 | Housing screw M3X6 for Heiniger Handy clipper 52 | SRV-HG-701-600-30A | Air filter for Heiniger Handy clipper
€0,24
Heiniger Heiniger Clipper Harness Lead
Looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger machines designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-708-540 | Blade head for Heiniger Xplorer 2 | SRV-HG-708-160 | Adjustment knob cover for Heiniger Xplorer 3 | SRV-HG-706-510 | Spacer screw for Heiniger Xplorer 4 | SRV-HG-707-091 | Blade pressure sleeve for Heiniger Xplorer 5 | SRV-HG-706-520 | Screw for Heiniger Xplorer clippers M5 x 14 6 | SRV-HG-708-141 | Head housing for Heiniger Xplorer 7 | SRV-HG-706-517 | Pressure spring for Heiniger Xplorer clippers 8 | SRV-HG-706-511 | Pressure arm for Heiniger Xplorer 9 | SRV-HG-708-507 | Blade drive block for Heiniger Xplorer 10 | SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger Xperience 11 | SRV-HG-706-518 | Blade leaf springs for Heiniger Xplorer 12 | SRV-HG-708-150 | Yoke guide for Heiniger Xplorer 13 | SRV-HG-706-521 | Blade mounting screw for Heiniger Xplorer 14 | HG-708-146 | Yoke sleeve for Heiniger Xperience/Xplorer 15 | SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Xplorer 16 | SRV-HG-706-524 | Seeger ring size 6 for Heiniger Xplorer clippers 17 | SRV-HG-708-145 | Crankshaft for Heiniger Xplorer clippers 18 | SRV-HG-708-142 | Crank sleeve for Heiniger Xplorer 19 | SRV-HG-708-543 | Gear for Heiniger Xplorer, 27 teeth 27 | SRV-HG-707-882 | Rubber feet for Heiniger Xplorer charger 30 | SRV-HG-708-430 | Upper housing for Heiniger Xplorer 31 | SRV-HG-708-061 | Switch slider for Heiniger Xplorer 32 | SRV-HG-708-461 | Switch lock for Heiniger Xplorer 33 | SRV-HG-708-450 | Lower housing for Heiniger Xplorer 34 | SRV-HG-708-510 | Front motor holder for Heiniger Xplorer 35 | SRV-HG-708-511 | Rear motor holder for Heiniger Xplorer 36 | HG-708-520 | Battery for Heiniger Xplorer 37 | SRV-HG-708-480 | Electronics/PCB for Heiniger Xplorer 39 | SRV-HG-701-711 | Screw for Heiniger Xplorer clippers M2.6 x 6 40 | SRV-HG-708-440 | Housing with switch for Heiniger Xplorer 41 | SRV-HG-707-555 | Pendant for Heiniger Xplorer 45 | HG-708-500 | Motor for Heiniger Xplorer 50 | SRV-HG-708-550 | Charging station for Heiniger Xplorer 51 | SRV-HG-708-570 | Charger housing for Heiniger Xplorer 52 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger clippers 53 | SRV-HG-708-563 | Charger base for Heiniger Xplorer 54 | SRV-HG-708-564 | LED lighting for Heiniger Xplorer charger 55 | SRV-HG-708-560 | Charger electronics for Heiniger Xplorer 60 | SRV-HG-708-590/EU | Charger power supply for Heiniger Xplorer
€6,00
Andis Andis Pulse ZR II Galaxy - professional cordless clipper, 5-speed with batteries and CeramicEdge blade (1.5mm)
Professional, cordless Andis Pulse ZR II clipper is now available in a new limited color, Purple Galaxy! It is equipped with a powerful yet quiet motor. With five speed settings, it can be adjusted to suit any coat type and grooming task. The lithium-ion battery allows for continuous operation for up to 3 hours without needing a charge and has no memory effect, enabling charging at any time. This next-generation clipper has a charging time equal to its runtime (120 min). It features a built-in battery charge indicator. It can handle all coat types, from thick, woolly undercoats to fine hair. Another advantage of the multiple speeds is that the blades operate very quickly, from 1800 to even 3800 strokes per minute. This model is very lightweight, and the ergonomic, non-slip handle ensures high comfort for all-day use. LED indicators signal the speed level. The Andis Pulse ZR II is compatible with all Snap-On type blades available on the market and comes packaged with a ceramic blade #10 (1.5mm), a carrying case, and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications: rotary motor 1800-3800 SPM strokes per minute 100-240 V frequency 50-60 Hz weight (clipper + blade + battery) 483g The set includes: Andis Pulse ZR II Purple Galaxy Limited Edition clipper two lithium-ion batteries elegant storage case Andis CeramicEdge blade #10 charging station power supply tube of oil spare brush user manual
€371,98
Andis Kiwak for Andis FHC ShowEdge Clippers
Original rocker for the Andis FHC ShowEdge clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Andis clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€19,20
Heiniger Connecting rod switch for Heiniger Xperience clippers
Contact wire for the switch of Heiniger X-series, Xperience clippers. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€1,20
Aesculap Spare parts for Aesculam Econom II clippers - Yoke arm
Are you looking for spare/service parts for the Aesculap Econom II clipper (GT474)? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 10 | SRV-AE-GT367202 | Yoke Arm for Aesculap Econom II Clipper (GT474) 11 | SRV-AE-GT367802 | Left Yoke Sleeve for Aesculap Econom II Clipper (GT474) 12 | SRV-AE-GT367803 | Right Yoke Sleeve for Aesculap Econom II Clipper (GT474) 13 | SRV-AE-TA004029 | O-ring for Aesculap Econom II Clipper (GT474) 14 | SRV-AE-TA008542 | Filtration Ring for Aesculap Econom II Clipper (GT474) 15 | SRV-AE-TA008295 | Shaft Screw for Aesculap Econom II Clipper (GT474) - | SRV-AE-GT374208 | Carbon Brush for Aesculap Econom II Clipper (GT474)
€2,40
Andis Andis DBLC Pulse ZR II Clipper Electronics
Electronics for Andis DBLC Pulse ZR II clippers.
€71,98
Moser Moser 1245 MAX - set with 4 plastic attachments
Excellent German quality and high precision have resulted in one of the most robust professional pet grooming clippers in the world. The Moser Max 1245 is equipped with a quiet and cushioned (to reduce vibrations) two-speed drive. A true 45W motor designed for continuous professional use of the clipper. The round 3-meter long cable facilitates maneuvering with the clipper. The clipper comes with four plastic attachment combs, cutting lengths: 3, 6, 9, 12mm. Compatible with all Snap-On/Clip-On blades. The clipper operates very quietly and without vibrations. Thanks to the air filter for cooling the motor, there is no need to clean the interior of the clipper. The ergonomic design ensures excellent comfort during grooming and does not tire the hand. The motor speed can be switched with a button from 2400 to 3000 RPM, allowing you to adjust the grooming pace to softer or coarser fur, as well as to the skill level of the user. The StarBlade® system blade is made with German precision, and the material used ensures many years of maintenance-free operation. Working with such equipment is a true pleasure! The clipper blade attaches in seconds, with a Clip system compatible with blades from brands: Andis, Oster, Moser, Geib, Aesculap, Wahl, Thrive. Included: original Moser® Max 1245 clipper made in Germany, Oster Moser #30F = 1mm blade, set of four plastic attachment combs, bottle of oil, cleaning brush, user manual + warranty card.
€172,56
Aesculap Kiwak for Aesculap FAV5 (GT105) Clippers
Replacement rocker for Aesculap Fav5 clippers (GT105) GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€9,60
Heiniger Original rocking base for Heiniger Opal clipper
Original, replacement rocker for the Heiniger Opal clipper. Not sure how to replace the rocker on your clipper? Call our service for assistance!
€3,60
Moser Adjustable lever for Moser Rex 1230 clipper
Are you looking for spare/service parts for the Moser Rex 1230 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Moser clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1020 | SRV-M-1230-7471 | Blade bed for Moser Rex 1230 clipper 1030 | SRV-M-1230-7720 | Blade guide for Moser Rex 1230 clipper 1040 | SRV-M-1230-7060 | Adjustment lever for Moser Rex 1230 clipper 1050 | SRV-M-1230-7730 | Oscillating rocker for Moser Rex 1230 1060 | SRV-M-1586-7020 | Motor for Moser Rex 1230 clipper 1070 | SRV-M-1230-7690 | Power cord for Moser Rex 1230 clipper 1080 | SRV-M-1230-7072 | Switch for Moser Rex 1230 clipper 1090 | SRV-M-1230-7760 | Lower housing for Moser Rex 1230 / 1233 clipper 1100 | SRV-M-1230-7555 | Upper housing for Moser Rex 1230 / 1233 clipper 1110 | SRV-M-1230-7560 | Connector for Moser Rex 1230 clipper 1120 | SRV-M-1230-7190 | Mounting caps for Moser Rex 1230 clipper 1130 | SRV-M-1230-7035 | Adjustment mechanism for Moser Rex 1230 clipper
€8,40
Heiniger Heiniger Saphir Vet - professional, cordless clipper for veterinarians with blade - rechargeable battery
High-quality Swiss SAPHIR Vet clipper from Heiniger, dedicated to veterinarians. Professional, cordless pet grooming clipper. Very quiet, lightweight, and sturdy construction. Includes a #40 blade with a cutting length of 0.25mm. Among professionals, this model is considered the best cordless clipper for grooming. Included: clipper with #40 blade (0.25mm), blade cleaning brush, oil, carrying case. Technical specifications: motor 35W, speed approximately 2650 strokes/min, cable 3m, blade width 40mm. Compatible with Snap-On blades from various manufacturers: Andis, Oster, Moser, Wahl, Thrive, Kim Laube, Aesculap, Geib, and others with this type of attachment.
€371,98
Joyzze Joyzze Green Stinger 5-in-1 Clipper - wireless grooming clipper with adjustable blade and LCD display
Joyzze Stinger is a quiet and lightweight pet grooming clipper. It features a built-in lithium-ion battery (no memory effect) that provides up to 240 minutes of continuous operation. Equipped with a powerful, high-speed motor with two speeds: 5000/6000 SPM/MIN (strokes per minute), ensuring that this clipper can handle any type of fur. The ergonomic and slim design allows for comfortable use without hand fatigue. Available in two housing colors to choose from. The clear LCD display shows the battery charge level and an icon for the second speed. Included with the clipper, you receive an adjustable stainless steel blade (cutting lengths of 0.5mm, 1.2mm, 1.6mm, 2.0mm, 2.8mm) and a set of three guide combs. By connecting a USB-C cable directly to the clipper, you can also use it in wired mode. This clipper is compatible with blades from the following models: Wah Bravura, Arco, Creativa, Kenchii Flash 5. Tip! To prevent the blades from overheating and dulling quickly, use oil both before and after grooming (for longer use, apply it during grooming as well). Apply it to the running clipper at the corners of the blade and wait a moment for the oil to spread automatically on the blade. This procedure will significantly extend the life of your blades. Technical specifications: power: 10 W number of speeds: 2 noise level:
€254,38
Andis Andis Pulse ZR II Floral - cordless clipper, 5-speed with two batteries and CeramicEdge blade (1.5mm)
Professional, cordless Andis Pulse ZR II clipper - now available in a new limited Floral color! Equipped with a powerful yet quiet motor. With five speed settings, it allows for speed adjustment to suit any coat type and work requirement. The lithium-ion battery enables continuous operation for 2 hours without the need for recharging and has no memory effect, allowing for charging at any time. This next-generation clipper has a charging time equal to its working time (120 min). It features a built-in battery status indicator. It can handle any coat type, from thick, woolly undercoats to fine hair. Another advantage of the multiple speeds is that the blades operate very quickly: from 1800 to even 3800 strokes per minute. This model is very lightweight, and the ergonomic, non-slip grip ensures high comfort during all-day use. LED indicators signal the speed level. The Andis Pulse ZR II is compatible with all Snap-On blades available on the market, packaged with a ceramic blade No. 10 (1.5mm), a case, and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications: rotary motor 1800-3800 SPM strokes per minute, 100-240 V, frequency 50-60 Hz, weight (clipper + blade + battery) 483g. The set includes: Andis Pulse ZR II Floral Limited Edition clipper, two lithium-ion batteries, a stylish storage case, Andis CeramicEdge blade No. 10, charging station, power supply, tube of oil, spare brush, user manual.
€371,74
Aesculap Aesculap Favorita II / FAV / Speed Clipper Pendant
Aesculap clip / holder for clippers. Compatible with models Favorita II, FAV 5, Speed. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€2,40
Heiniger Heiniger Clipper Ring/Timer
Are you looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 1 SRV-HG-708-540 Blade head for Heiniger Xplorer clipper 2 SRV-HG-708-160 Adjustment knob cover for Heiniger Xplorer 3 SRV-HG-706-510 Spacer screw for Heiniger Xplorer clipper 4 SRV-HG-707-091 Blade pressure sleeve for Heiniger Xplorer 5 SRV-HG-706-520 Screw for Heiniger Xplorer clippers M5 x 14 6 SRV-HG-708-141 Head housing for Heiniger Xplorer clipper 7 SRV-HG-706-517 Pressure spring for Heiniger Xplorer clippers 8 SRV-HG-706-511 Pressure arm for Heiniger Xplorer 9 SRV-HG-708-507 Blade drive block for Heiniger Xplorer clipper 10 SRV-HG-706-525 Guide screw M3 X 6 for Heiniger Xperience 11 SRV-HG-706-518 Blade leaf springs for Heiniger Xplorer 12 SRV-HG-708-150 Yoke guide for Heiniger Xplorer clipper 13 SRV-HG-706-521 Blade mounting screw for Heiniger Xplorer 14 HG-708-146 Yoke sleeve for Heiniger Xperience/Xplorer 15 SRV-HG-707-088 Ring/seger size 3.73mm for Heiniger Xplorer 16 SRV-HG-706-524 Seeger ring size 6 for Heiniger Xplorer clippers 17 SRV-HG-708-145 Crankshaft for Heiniger Xplorer clippers 18 SRV-HG-708-142 Crank sleeve for Heiniger Xplorer clipper 19 SRV-HG-708-543 Gear for Heiniger Xplorer, 27 teeth 27 SRV-HG-707-882 Rubber feet for Heiniger Xplorer charger 30 SRV-HG-708-430 Upper housing for Heiniger Xplorer clipper 31 SRV-HG-708-061 Switch slider for Heiniger Xplorer 32 SRV-HG-708-461 Switch lock for Heiniger Xplorer 33 SRV-HG-708-450 Lower housing for Heiniger Xplorer clipper 34 SRV-HG-708-510 Front motor holder for Heiniger Xplorer 35 SRV-HG-708-511 Rear motor holder for Heiniger Xplorer 36 HG-708-520 Battery for Heiniger Xplorer clipper 37 SRV-HG-708-480 Electronics/PCB for Heiniger Xplorer 39 SRV-HG-701-711 Screw for Heiniger Xplorer clippers M2.6 x 6 40 SRV-HG-708-440 Housing with switch for Heiniger Xplorer clipper 41 SRV-HG-707-555 Pendant for Heiniger Xplorer clipper 45 HG-708-500 Motor for Heiniger Xplorer clipper 50 SRV-HG-708-550 Charging station for Heiniger Xplorer clipper 51 SRV-HG-708-570 Charger housing for Heiniger Xplorer clipper 52 HG-707-557 Large housing screw (KA 3x16) for Heiniger clippers 53 SRV-HG-708-563 Charger base for Heiniger Xplorer clipper 54 SRV-HG-708-564 LED lighting for Heiniger Xplorer charger 55 SRV-HG-708-560 Charger electronics for Heiniger Xplorer clipper 60 SRV-HG-708-590/EU Charger power supply for Heiniger Xplorer clipper
€1,20
Aesculap Gear wheel pad for Aesculap FAV5 (GT306), Favorita II (GT104) clippers
Are you looking for spare/service parts for the Aesculap Fav5 CL (GT306) clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | AE-GT201 Battery for Aesculap Fav5 CL (GT306) 2 | GT300801 Lower housing for Aesculap Fav5 CL (GT306) 3 | GT300802 Upper housing for Aesculap Fav5 CL (GT306) 4 | GT200248 Power switch button for Aesculap Fav5 CL (GT306) 5 | SRV-AE-GT200245 Switch guide for Aesculap Fav5 CL (GT306) 6 | SRV-AE-GT200249 Switch contact for Aesculap Fav5 CL (GT306) 7 | SRV-AE-GT300224 Felt oil seal for Aesculap Fav5 CL (GT306) 8 | SRV-AE-GT300880 Rocker for Aesculap Fav5 CL (GT306) 9 | SRV-AE-TA003820 Locking ring for rocker of Aesculap Fav5 CL (GT306) 10 | SRV-AE-GT104225 Felt washer for Aesculap Fav5 CL (GT306) 11 | SRV-AE-GT200850 PCB electronics for Aesculap Fav5 CL (GT306) 12 | GT300890 Motor for Aesculap Fav5 CL (GT306) 13 | SRV-AE-TA004637 Gear wheel washer for Aesculap Fav5 CL (GT306) 14 | SRV-AE-TA004663 Electronics plate screw for Aesculap Fav5 CL (GT306) 15 | SRV-AE-TA013499 M3x16 housing screw for Aesculap Fav5 CL (GT306) 16 | SRV-AE-GT105415 Blade hinge for Aesculap Fav5 CL (GT306) 17 | SRV-AE-TA013521 Motor O-ring for Aesculap Fav5 CL (GT306) - 23x3.6mm 18 | SRV-AE-TA013522 Motor O-ring for Aesculap Fav5 CL (GT306) - 30x2.65mm 19 | SRV-AE-GT300305 Rocker cap for Aesculap Fav5 CL (GT306)
€1,20
Moser Motor for Moser 1245 and Wahl KM2 Clippers
Original motor for Moser 1245 and Wahl KM-2 clippers with a power of 45W. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€43,18
Heiniger Z22 Gear for Heiniger Xperience Clippers
Z22 Gear for Heiniger Xperience Clippers. GroomerShop.pl is an authorized warranty and post-warranty service for animal grooming clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€9,60
You have seen 324 out of 557 products
